FRP CleanSeam™ panel is compromised of fiberglass-reinforced plastic panels factory adhered to an insulated metal panel. These panels are resistant to mold, mildew and rot. The panel delivering a superior R-value for any controlled environment and meet USDA and FSIS requirements.

FRP CleanSeam™ enables wall and partition panels to join almost seamlessly by using a two-part caulk system, blending the panels together to form a flush surface hard seam. This caulking system eliminates penetrable spaces and solidifies the panels’ structure. FRP panels’ seams are more effective than surface-applied silicone seams which deteriorates under rigorous cleaning required to sanitize heavy-use spaces such as commercial kitchens, food prep and processing areas.

Trust TrueCore’s FRP CleanSeam™, produced using veteran knowledge and experience for the industry’s best contractors.

Download Data Sheet

CleanSeam

Panel Profile

CleanSeam Joint

Side Joint

EXTERIOR PROFILE & TEXTURE

No Profile, 0.075″ thick, Class A, smooth FRP

INTERIOR PROFILE & TEXTURE

No Profile, 0.075″ thick, Class A, smooth FRP or Mesa, 1/8″ deep plank or Light Mesa, 1/16″ deep plank, embossed

SUBSTRATE

26, 24, 22 Ga. G-90 galvanized or AZ50 aluminum-coated steel

26, 24 Ga.  304L and 316L stainless steel with 2B finish

COATINGS

Non FRP face available with USDA compliant Polyester Igloo White

WIDTH

42″, 44.4″

LENGTH

8’-0” to 20’-0” standard (vertical applications)

THICKNESS

2”,  3”, 4”, 5”, 6”

CORE

Foamed-in-place Class 1 rated PUR

JOINT

Double Tongue and Groove for concealed fastening

R-VALUE

R-8.7 per inch of thickness (nominal)