CFR Roof panel with insulated core provide an all-in-one design solution. This 2″ standing seam panel combines durable interior and exterior faces with an unsurpassed weathertight seal and service life. The exterior Mesa profile is 1/8″ deep embossed planks. Can be used on roof slopes as low as 1/2″:12″.
CFR Roof panels comes standard with factory-cut panel ends, factory notching and factory swaged ends which help reduce erection costs and additional field work. Factory installed backer plates at the endlaps eliminate pre-drilling for special fasteners.
CFR panels function as roofing for coolers, freezers, food processing and dry good warehouses. When temperature control and longevity is critical this is the roof panel of choice.
Trust TrueCore’s CFR Roof, produced using veteran knowledge and experience for the industry’s best contractors.
Download Data Sheet
Panel Profile
Side Joint
EXTERIOR PROFILE & TEXTURE
2″ high standing seam with a Mesa profile between the seams, embossed
INTERIOR PROFILE & TEXTURE
Mesa, 1/8″ deep planks, spaced at nominal 4″ on center, embossed or smooth
EXTERIOR FACINGS
24, 22 Ga. G-90 galvanized or AZ50 aluminum coated steel or 24 Ga. AZ55 with a clear acrylic coating
INTERIOR FACINGS
26, 24, 22 Ga. G-90 galvanized or AZ50 aluminum-coated steel
COATINGS
Siliconized Polyester (SMP)
Fluoropolymer (PVDF)
Polyester*
PVC Plastisol*
Flurothane II, IV, V
*Polyester and PVC Plastisol interior applications only
WIDTH
30″*, 36″, 42”
LENGTH
9’-6” to 53’-0” standard
Contact TrueCore for information and pricing on longer lengths.
THICKNESS
2”, 2.5”, 3”, 4”, 5”, 6”
CORE
Foamed-in-place Class 1 rated PUR
JOINT
Mechanically seamed singlelock standing seam on the exterior side with a single tongue and groove interlock on the interior
R-VALUE
R-8.7 per inch of thickness (nominal)